TECHNICAL CHARACTERISTICS
| Name of characteristics and parameters | Unit of measure | Values |
| Nominal productivity of the plant on sludge | cub.m/h | 5 |
| Maximum productivity of the plant on sludge | cub.m/h | 15* |
| Consumption of reverse technical water, approximately | cub.m/shrift | 25 |
| The characteristic of the water arriving on washing (in a cycle): | ||
| - Temperature | °Ñ | +5…+80** |
| - The oil content of not more than | g/kg | 1,0 |
| - Content of mechanical impurities (up to 40 μm), not more | % | 5 |
| Number of equipment units , including: | pieces | 4*** |
| - Soil preparation unit | piece | 1 |
| - Soil cleaning unit | piece | 1 |
| - Water treatment unit | piece | 2 |
| AC Power supply for the equipment | ||
| - Voltage | V | 380 |
| - Frequency | Hz | 50 |
| - Fluctuations in the mains | % | ±10 |
| Power consumption , not more than | kW | 110 |
| Soil washing | — | possible |
| The separation of liquid phases | — | possible |
| Application of surfactants, chemicals | — | provided (if neccessary) |
| Ability to work with a liquid material | — | available |
| Ability to work with a solid material | — | available |
| Possibility of continuous monitoring of explosive gases using the gas analyzer unit | — | available |
* - The performance of purifying the soil depends on the degree of contamination and the composition of the soil.
** - In order to avoid performance degradation of the plant, as well as to increase the quality of the soil purification is recommended to wash soil with water at a temperature of +60 ... + 80°C (depending on the composition of contaminated soil) using steam generator or boiler.
*** - as standard, without optional equipment.
Preparation and cleaning the soil is made in several stages, the order of which is described below.